Isivamvo esikhulu sokuJonga Isinxibo sentloko esiguquguqukayo soMthunzi wokhuseleko lweSolar Welding Isigcina-ntloko esiFakelweyo Umfanekiso

Isivamvo esikhulu sokuJonga Isinxibo sentloko esiguquguqukayo soMthunzi sokhuseleko lweSolar Isigcina-ntloko se-Welding

Isicelo seMveliso:

I-Solar auto mnyama isigcina-ntloko se-welding sisetyenziswa ngokubanzi kwishishini le-welding. Sisixhobo sokuzikhusela. kodwa kunye nesixhobo esibalulekileyo se-welders. I-auto mnyama i-helmet ye-welding ithatha indima ebaluleke ngakumbi nangakumbi ekukhuseleni i-welders, ukuphucula umgangatho we-welding kunye nokusebenza kakuhle.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Inkcazo
I-Auto Darkening i-helmet ye-welding yenzelwe ukukhusela amehlo akho kunye nobuso kwiintlantsi, i-spatter, kunye nemitha eyingozi phantsi kweemeko ze-welding eziqhelekileyo. Isihluzo sokwenza ubumnyama ngokuzenzekelayo sitshintsha ngokuzenzekelayo ukusuka kwimeko ecacileyo ukuya kwindawo emnyama xa i-arc ibethelwa, kwaye ibuyela kwimeko ecacileyo xa i-welding iyeka.

Iimbonakalo
♦ Isigcina-ntloko se-welding yeengcali
♦ Iklasi ye-Optical : 1/1/1/1
♦ Umbono omkhulu ngakumbi
♦ Ukuwelda kunye nokuSila nokusika
♦ Ngemigangatho ye-CE, ANSI,CSA,AS/NZS

Iinkcukacha zeemveliso

ADF9100 TRUE

IMODE	TN360-ADF9100
Iklasi ye-Optical	1/1/1/2
Ubungakanani besihluzi	114×133×10mm
Jonga ubukhulu	98×88mm
Umthunzi wemeko yokukhanya	#3
Umthunzi wemeko emnyama	Ukuguquguquka koMthunzi we-DIN5-8/9-13, ukusetwa kweQhubhu langaphandle
Ukutshintsha ixesha	1/25000S ukusuka ekuKhanyeni ukuya kuMnyama
Ixesha lokubuyisela ngokuzenzekelayo	0.2 S-1.0S Ukukhawuleza ukuya kwi-Slow, uhlengahlengiso olungenasinyathelo
Ukulawula uvakalelo	Phantsi ukuya phezulu, uhlengahlengiso olungenanyathelo
Uluvo lweArc	4
Ephantsi TIG Amps Rated	AC/DC TIG,> 5 amps
UKUSILA umsebenzi	Ewe (#3)
Uluhlu lomthunzi wokusika	Ewe (DIN5-8)
Ukuzijonga i-ADF	Ewe
Ibhethi ephantsi	Ewe (i-LED eBomvu)
Ukhuseleko lwe-UV / IR	Ukuya kuthi ga kwi-DIN16 ngalo lonke ixesha
Ubonelelo olunamandla	Iiseli zeSola kunye nebhetri yeLithium eTshintshwayo ( CR2450)
Vula/cima	Okuzenzekelayo ngokupheleleyo
Izinto eziphathekayo	Inqanaba lempembelelo ephezulu, inayiloni
Iqondo lokushisa elisebenzayo	ukusuka -10℃–+55℃
Ukugcina iqondo lokushisa	ukusuka -20℃–+70℃
Iwaranti	iminyaka eyi-2
Umgangatho	CE EN175 & EN379, ANSI Z87.1, CSA Z94.3
Uluhlu lwesicelo	I-Stick Welding (SMAW); I-TIG DC&AC; TIG Pulse DC; TIG Pulse AC; MIG/MAG/CO2; I-MIG/MAG Pulse; Ukusika i-Plasma Arc (PAC); I-Plasma Arc Welding (PAW); Ukusila.