I-Solar Auto Darkening Welding Helmet ene-Ce evunyiweyo kunye nomsebenzi wokuSila

Isicelo seMveliso:

I-Solar auto mnyama isigcina-ntloko se-welding sisetyenziswa ngokubanzi kwishishini le-welding. Sisixhobo sokuzikhusela. kodwa kunye nesixhobo esibalulekileyo se-welders. I-auto mnyama i-helmet ye-welding ithatha indima ebaluleke ngakumbi nangakumbi ekukhuseleni i-welders, ukuphucula umgangatho we-welding kunye nokusebenza kakuhle.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Inkcazo
I-Auto Darkening i-helmet ye-welding yenzelwe ukukhusela amehlo akho kunye nobuso kwiintlantsi, i-spatter, kunye nemitha eyingozi phantsi kweemeko ze-welding eziqhelekileyo. Isihluzo sokwenza ubumnyama ngokuzenzekelayo sitshintsha ngokuzenzekelayo ukusuka kwimeko ecacileyo ukuya kwindawo emnyama xa i-arc ibethelwa, kwaye ibuyela kwimeko ecacileyo xa i-welding iyeka.

Iimbonakalo
♦ Isigcina-ntloko se-welding yobungcali
♦ Iklasi ye-Optical : 1/1/1/2
♦ Uhlengahlengiso olungena nyathelo
♦ Ngemigangatho ye-CE, ANSI,CSA,AS/NZS

Iinkcukacha zeemveliso
ADF86009242

IMODE	TN08/12/16-ADF8600
Iklasi ye-Optical	1/1/1/2
Ubungakanani besihluzi	110×90×9mm
Jonga ubukhulu	92 × 42mm
Umthunzi wemeko yokukhanya	#3
Umthunzi wemeko emnyama	Ukuguquguquka koMthunzi we-DIN9-13, ukusetwa kweQhubhu laNgaphandle
Ukutshintsha ixesha	1/25000S ukusuka ekuKhanyeni ukuya kuMnyama
Ixesha lokubuyisela ngokuzenzekelayo	0.2 S-1.0S Ukukhawuleza ukuya kwi-Slow, i-Internal Knob setting
Ukulawula uvakalelo	Phantsi ukuya phezulu, isicwangciso seQhubhu sangaphakathi
Uluvo lweArc	2
Ephantsi TIG Amps Rated	AC/DC TIG,> 15 amps
UKUSILA umsebenzi	Ewe (#3)
Uluhlu lomthunzi wokusika	/
Ukuzijonga i-ADF	Ewe
Ibhethi ephantsi	Ewe (i-LED eBomvu)
Ukhuseleko lwe-UV / IR	Ukuya kuthi ga kwi-DIN16 ngalo lonke ixesha
Ubonelelo olunamandla	Iiseli zeSola kunye nebhetri yeLithium eTshintshwayo ( CR2032)
Vula/cima	Okuzenzekelayo ngokupheleleyo
Izinto eziphathekayo	Inqanaba lempembelelo ephezulu, inayiloni
Iqondo lokushisa elisebenzayo	ukusuka -10℃--+55℃
Ukugcina iqondo lokushisa	ukusuka -20℃--+70℃
Iwaranti	iminyaka eyi-2
Umgangatho	CE EN175 & EN379, ANSI Z87.1, CSA Z94.3
Uluhlu lwesicelo	I-Stick Welding (SMAW); I-TIG DC&AC; TIG Pulse DC; TIG Pulse AC; MIG/MAG/CO2; I-MIG/MAG Pulse;Plasma Arc Welding (PAW); Ukusila.

Iinkcukacha zezinto:

hfd (1)

Uyilo olulodwa
Amandla avula kwaye acime ngokuzenzekelayo. Ibhanti yentloko ehlengahlengiswayo ene-foam esemgangathweni yokuthuthuzela okuphezulu.Ukuhambelana ngokupheleleyo ne-CE kunye ne-ANSI Z87 Standards. Ulwakhiwo lwenayiloni yePolymide enomgangatho owenziweyo we-helmet.

hfd (2)

uKhuseleko oluPhumayo
Uxhotyiswe ngobuntununtunu kunye nokumisela ukulibaziseka ukulungiselela ukuziqhelanisa neemeko ezahlukeneyo zokusebenza; Yonwabela ukubonakala okuphuculweyo kunye nokuqondwa kombala. Inqanaba lokukhanya lokucoca yi-DIN4 kwaye ixesha ukusuka kumnyama ukuya kwimeko eqaqambileyo linokuseta ukusuka kwi-0.1s ukuya kwi-1.0s.

hfd (3)

Ukusebenza okuphezulu
Izinto eziphezulu zePP ezomeleleyo, ukunxiba okuxhathisayo kunye nokuchasana nokuguga. Ibhetri enikwe amandla ngeteknoloji yephaneli yelanga kunye neCR2032 Lithium ibhetri ubomi obude (ukuya kwiiyure ezingama-5000). Uyilo olunesitayile, luyakhazimla ngakumbi.

hfd (4)

Auto-Ubumnyama
Inkqubo yokwenza ubumnyama ngokuzenzekelayo ukukhusela amehlo kunye nobuso kwiintlantsi ezinobungozi, isitshizi kunye nemitha yemitha ngexesha leemeko eziqhelekileyo ze-welding. Ilungele i-ARC, i-SMAW, i-MIG (Enzima), i-GTAW, i-SAW, i-PAC, iinkqubo ze-PAW ze-Plasma welding kunye nabanye abaninzi.

Ngaphambili: Ixabiso eliphantsi Lokwenza Umnyama Welding Isigcina-ntloko TN12-5000SG

Okulandelayo: I-RoHS iyahambelana ne-Auto Darkening Welding Headgear ye-PP ye-Helmet ye-Welder

Bhala umyalezo wakho apha kwaye uwuthumele kuthi